VHC Timing Sandpaper
A 5" strip of premium 320 grit adhesive backed sandpaper used for adjusting the timing of your VHC parts.
Timing Shims add material, making the turn stop further counter-clockwise.
Sanding down the female threaded face removes material, allowing the part to turn further clockwise.
So, if your part needs adjusted to screw on LESS, use timing shims, and if it needs to screw on MORE, use this sandpaper.
Sanding less is advised. Sand ONLY a small amount of material off, then check. You can always unscrew and sand a little more, but you'd need to add more shims if you were to sand too much!